FloAire DU200H-2HP230V3PH Roof Exhaust Fan – 4400 CFM, 28" Fan Base, 1192 RPM, 20-3/4" Wheel, 3-Phase, 2HP, 230V, VFD

The FloAire DU200H High-Speed Direct Drive Centrifugal Upblast Exhaust Fan delivers 4400 CFM of strong airflow with a 2 HP, 230V, 3-phase motor and a 20-3/4" wheel, making it ideal for commercial kitchens needing reliable grease and heat exhaust. It includes a factory-mounted VFD with manual speed control, a built-in disconnect switch, insulated heat baffle, grease cup, and a hinge kit for easy maintenance. If you need a high-performance upblast fan with adjustable speed, premium efficiency, and all essential accessories included, the DU200H is a ready-to-install solution.

• Voltage: 230V
• CFM: 4400
• Horse Power: 2 HP
• Phase: 3 PH
• Fan base size: 28"

FloAire DU200H High-Speed Upblast Exhaust Fan

Key Features

• High-speed direct drive centrifugal design

• Built-in disconnect switch for safe and easy servicing

• 20-3/4" fan wheel

Performance

• Airflow: 4400 CFM @ 0.750" w.c. ESP

• Fan Speed: 1192 RPM

Motor Specifications

• Power: 2 HP

• Phase/Voltage: 3-Phase, 230V

• Frequency: 60 Hz

• FLA: 6.5

• Type: ODP (Open Drip Proof)

• Efficiency: Premium E-Plus3

Included Components

1. Grease Cup for kitchen-duty centrifugal exhaust fans, Qty: 1

        - Dimensions: 17-1/8" L x 5-1/16" W x 3-3/4" H

        - Material: 20-gauge

        - Includes down spout

2. VAV (Variable-Air-Volume) Wiring Package for commercial fans, Qty: 1

      - Includes Manual Speed Control Variable Frequency Drive (VFD) included

3. VFD (Variable Frequency Drive), Qty: 1

      - Model: ESV152N02YXB

      - Max Motor: 2 HP

      - Voltage: 200/240V, 1-Phase or 3-Phase Input

      - Max Amps: 7.0A

      - NEMA 1 enclosure

      Note: Part requires programming (208V 1Ph)

4. Factory-Mounted VFD, Qty: 1

- Installed and wired inside the unit’s control vestibule

5. VFD Mounting Bracket, Qty: 1

Fits DU/DR 180 & 200 models

6. Insulated Heat Baffle (Type 475FRK), Qty: 1

    - 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans

    - Cut to fit shaft wrapper and around vibration isolators and motor cooling hole.

    - Caulked down to top plate.

7. Standard Hinge Kit, Qty: 1

    - for exhaust fan roof curbs

    - Includes hardware for curb and fan base

    - Fits fan wheels 20" or smaller

    - Material: 12-gauge galvanized

    - Ships loose

NOTE: 1 PHASE 230V INPUT VIA VFD . CANNOT DO 1 PHASE 115V INPUT.  This motor is NOT available with 115v single phase input for VFD.